요약 내용

1. initrd 포맷 변경하여 부팅 속도 향상
2. “TTYD/DUFS/HTTP 포트 변경” 후 menu.sh가 잠겨 다시 접근할 수 없는 문제 해결
3. 정적 IP 설정, 무선 계정 설정이 멈추는 문제 해결
4. 11세대 이상 메인보드에서 VT-d를 켠 상태로 4.x 커널이 설치된 모델 부팅 실패 문제 해결
5. 다수의 로직과 설명에 대한 최적화
6. ADL-N 모델에 대한 epyc7002 i915 지원 수정, 감사@moetayuko
7. geminilake kvmx64 플랫폼에 대한 beep 지원 수정
8. nvmevolume 플러그인이 작동하지 않는 문제 수정
9. 부팅 및 종료시 부저 소리가 나도록 beep 추가 (마더보드에 부저가 필요)
10. 마이윈 컴퓨터 장치의 RESET 버튼 기능을 맞추기 위한 maiyunda 추가 마이윈다 https://www.maiyunda.com/
11. SMART 정보를 수정하기 위한 HBA 장치에 대한 smartctl 플러그인 추가 (테스트 필요)

---

1. Modify the initrd format to speed up the boot process.
2. Fix the problem that menu.sh is locked and cannot be accessed again after “Change ports of TTYD/DUFS/HTTP”.
3. Fix the problem that “Set static IP” and “Set wireless account” are stuck.
4. Fix the problem that the model with 4.x kernel installed fails to boot when VT-d is turned on for 11th generation and above motherboards.
5. Optimize a lot of logic and descriptions.
6. Fix epyc7002 i915 support for ADL-N models, thanks @moetayuko.
7. Fix beep support for geminilake kvmx64 platform.
8. Fix the problem that nvmevolume plugin does not work.
9. Add beep addon to make beeps when starting and shutting down (need the motherboard to have a buzzer).
10. Add maiyunda addon to adapt the RESET button function of Maiyunda device Maiyunda https://www.maiyunda.com/.
11. Add smartctl addon to fix the SMART information of disks on HBA devices (need tested).

Full Changelog: 24.11.1...24.11.11

원문 내용

1. 修改 initrd 格式, 加快启动速度.
2. 修复 “修改 TTYD/DUFS/HTTP 的端口” 后 menu.sh 被锁无法再次进入的问题.
3. 修复 “设置静态 IP”, “设置无线帐号” 卡住的问题.
4. 修复 11代以上主板开启 VT-d 时，安装 4.x 内核的型号启动失败的问题.
5. 优化大量逻辑和描述。
6. 修复 epyc7002 i915 对 ADL-N 型号的支持，thanks @moetayuko.
7. 修复 geminilake kvmx64 平台的 beep 支持.
8. 修复 nvmevolume 插件 不生效的问题.
9. 添加 beep 插件, 在启动和关机时发出哔声(需要主板有蜂鸣器).
10. 添加 maiyunda 插件, 迈云达设备 RESET 按钮功能适配 迈云达 https://www.maiyunda.com/.
11. 添加 smartctl 插件, 修复 HBA 设备上磁盘的 SMART 信息 (待测试).

---

1. Modify the initrd format to speed up the boot process.
2. Fix the problem that menu.sh is locked and cannot be accessed again after “Change ports of TTYD/DUFS/HTTP”.
3. Fix the problem that “Set static IP” and “Set wireless account” are stuck.
4. Fix the problem that the model with 4.x kernel installed fails to boot when VT-d is turned on for 11th generation and above motherboards.
5. Optimize a lot of logic and descriptions.
6. Fix epyc7002 i915 support for ADL-N models, thanks @moetayuko.
7. Fix beep support for geminilake kvmx64 platform.
8. Fix the problem that nvmevolume plugin does not work.
9. Add beep addon to make beeps when starting and shutting down (need the motherboard to have a buzzer).
10. Add maiyunda addon to adapt the RESET button function of Maiyunda device Maiyunda https://www.maiyunda.com/.
11. Add smartctl addon to fix the SMART information of disks on HBA devices (need tested).

Full Changelog: 24.11.1...24.11.11

링크 : https://github.com/RROrg/rr/releases/tag/24.11.11